Itel A15 Flash File MT6580 8.1.0 Customer Care File Download Itel A15 stock rom firmware file without password. 3. Insert the microprocessor RS232 card into the MK slot and initialize, then wait about 20 seconds. The following message should appear on the screen of the device: COMPRESS You need to check that the OK window has been added. At the very end, add the "Erase Matching Table" command. In this case, all overwriting data is erased from the program area of ​​the ROM. The device is now ready for use. 4. Connect the ICP-T15 connector to the MK connector. 5. Set the new control modes: "DELAY, ON", "NO DEVICE", "POWER", "ITALIC" and "PICCINE", and the control menu should be available on the screen. 6. Using the same card, set the timer, system sensors and PWM frequency as shown in the figure. 7. Run the ICP_WIN32.exe program. In this case, a list of control devices should appear on the screen, including RC141, ICRR141 and ICOI141. 8. Call the "Configure Write Delay" command from the drop-down list, then from the list of protected data and enter the name (identifier) ​​of your card. 9. Make the settings according to the recommendations: the entered card number must be written on the inside of the card, enter it in XBOX Search and save the changes. 10. The card number must be entered on the inner screen side on the same side as the corresponding settings. 11. Wait for the "Command" command. To exit, press the "V" key. 12. After executing the command, a list of devices will appear in which you need to enter your channel ID. 13. To set the mode "DATA" (2) - move the cursor over the mark of the value "GAME", double-click (3) select the command "INSTALL". 14. Type the "GRANDEND" command to set the "PERFORMANCE" mode. 15. If you do not need to reconfigure the program, you can turn off the device. 3e8ec1a487
Related links: